Anker 521 PowerHouse 256WH

Anker 521 Portable Power Station (PowerHouse 256Wh)

Lightweight Power Station with 398W Total Output

Extremely Durable Batteries

Lithium iron phosphate (LiFePO4) batteries have a 6 times longer lifespan and can last 3000 cycles compared to the average battery of other portable power stations.

A Place for All Your Devices

The high-capacity power station pumps out power to all your mobile devices, computers, small appliances, and emergency equipment with zero interference.

Light Up the Dark

Features a built-in LED light to keep you and your loved ones safe in the dark during a blackout. To activate SOS mode, long press for 2 seconds.

Power-Saving Mode

To reduce energy waste, the power station will instantly power off once your devices are fully charged. For a stable and optimal charge, simply turn off power-saving mode.

Smart LED Display

Easy-to-read LED display shows the remaining battery capacity, current input and output status, as well as estimated recharge time.

Specs

Cell Capacity 256Wh

Lifecycle 3000 cycles to 80%+ capacity

Operating Temperature 32°F-104°F / 0°C-40°C

Ambient Temperature 32°F-104°F / 0°C-40°C

Size 21.6×21.14×14.4cm / 8.5×8.32×5.67inches

Weight 4.34kg / 9.57lbs

Input:

DC Input 11-28V⎓5.5A (65W Max); USB-C Input 5V⎓3A / 9V⎓3A / 15V⎓3A / 20V⎓3A (60W Max)

Output:

Car Charger Output 12V⎓10A; AC Output 220-240V~, 0,9A Max, 50Hz, 200W; USB-A Output 5V⎓3.6A (2.4A Max Per Port); USB-C Output 5V⎓3A / 9V⎓3A / 15V⎓3A / 20V⎓3A (60W Max)

Notes:

– When the control buttons are turned on, even if no devices are being charged, there will still be a certain amount of no load power consumption. Therefore, it is recommended to turn off the control buttons after using them to avoid draining power.

– Incompatible with appliances that require more than 200W input such as microwave, electric grill, refrigerator, electric vehicle, air compressor and more.

– Do not use with CPAP overnight and in power saving mode.

-The power station supports pass-through charging while connected via a vehicle output or AC outlet.

– Please remove the protective film on the screen before using it for the first time.

– If you feel that the battery drains fast when used for the first time, it is because the display information of the remaining power is inaccurate when the product is activated for the first time. The power remaining will automatically calibrate by discharging the battery to 1% and then recharging it to 100%.

– Use any 12V-28V solar charger with a DC 7909 male connector to charge the power station. A compatible solar panel for Anker PowerHouse will be available soon.